top of page

4E-SW6 is a DIN-rail mounted 100V audio matrix with 2 inputs and 6 outputs, dedicated for both 4EVAC Compact and Impact systems. 4E-SW6 has two 100V audio inputs (CHA, CHB) which connect directly to amplifier outputs. 4E-SW6 expands the number of independent loudspeaker lines with individual surveillance and short-circuit isolator units (Loopdrive). Each loudspeaker line can handle up to 200 W load and can be assigned as a separate individual zone. One input can accept maximum 500 W of power, this is also the limit for total load of all 6 output lines together.

Remote Controlled Zone Extender Module for Additional 6-Sub-Zones

SKU: 4E-SW6
    • DIN-RAIL

    • Directly connected to a single/dual output line of the DA-200/ DCA2.500 amplifier. The SW6 Zone Extender & Switching module sub-devides the signal path A & B into 6x additional surveilled speaker-line outputs.

    • All SW6-outputs can be individually addressed and are carrying signal path A or B.

    • Each output can switch to internal 20kHz line surveillance generator (path C). 

    • Each switched output zone requires an EOL-device for line-integrity detection.

    • Max. of 3x SW6 sharing 1x L-Net connection for communication and power purpose. (Without additional 24VDC) The SW6 can be remotely powered incase more than 3x SW6 units need to be linked to a single L-Net line.

    • Max. load: 500W per channel

    • Redundant L-Net link, 2xRJ45

    • Addressable: 0-255 • EN54-16

Related Products